『Caleffi Flow Meter: Sourcing Quicksetter Balancing Valve Sizing Specs』Related information(v cone flow meter|rotary gas meter|gallon meter|gear meter|metal tube rotameter|glass tube rotameter|nutating disk meter|transit time ultrasonic flow meter|wedge flow meter|pd meters|hydraulic flow meter|ultrasonic water flow meter|water flow meter|air flow meter|magnetic water flow meter|oxygen flow meter|gas flow meter|argon flow meter|air velocity meter|gasoline flow meter|fuel flow meter|ultrasonic water meter|digital water meter|nitrogen flow meter|solid flow meter|Oxygen tank flow meter|digital water flow meter|diesel fuel flow meter|steam flow meter|02 flow meter|compressed air flow meter|oil flow meter|liquid flow meter)
Caleffi Flow Meter: Sourcing Quicksetter Balancing Valve Sizing Specs
Quick Answer: The Caleffi QuickSetter balancing valve with flow meter is sized by pipe diameter DN15 to DN50 and target flow rate. Engineers should check the flow range in liters per hour, maximum working pressure 10 bar, and maximum temperature 100 degrees Celsius. Silver Automation Instruments can supply equivalent industrial flow meters with 4-20 mA HART output for the same pipe sizes.
How the Caleffi QuickSetter Flow Meter Works
The QuickSetter is not a standard flow meter. It combines a balancing valve, a differential pressure regulator, and a direct reading flow meter in one brass body. The QuickSetter 132 series is the most common model we see in projects. HVAC contractors install these valves on chilled water, hot water, and condenser water circuits. The flow scale on the glass tube shows actual flow rate in liters per hour or gallons per minute.
In practice, commissioning engineers use the flow meter to set the correct flow through each terminal unit. They adjust the valve until the float in the glass tube lines up with the target value. Then they lock the memory stop. This prevents tampering after commissioning.
Sizing Specs for Caleffi QuickSetter Valves
Here are the key specifications we collect from customer sites. Most engineers skip this part and order the wrong size. Do not do that.
Pipe size DN15 has a flow range from 200 to 1200 liters per hour. DN20 covers 400 to 2500 liters per hour. DN25 covers 700 to 4500 liters per hour. DN32 covers 1200 to 7500 liters per hour. DN40 covers 2000 to 12000 liters per hour. DN50 covers 3000 to 20000 liters per hour. These ranges are approximate and depend on the exact model and differential pressure setting.
Maximum working pressure is 10 bar at 20 degrees Celsius. Maximum medium temperature is 100 degrees Celsius for water. The body material is brass, internal parts are stainless steel, and the seals are EPDM. Connections are female thread ISO 228 or NPT depending on the distribution region.
The built in flow meter accuracy is around plus or minus 5 percent of full scale. That is good enough for balancing but not for billing. If you need custody transfer or high accuracy flow data for a SCADA system, use an electromagnetic flow meter from Silver Instruments with plus or minus 0.5 percent accuracy.
Sourcing Caleffi QuickSetter Valves in Southeast Asia and Latin America
Here is the thing. Caleffi has official distributors in Singapore, Malaysia, and many Latin American countries. But stock for a specific size like DN32 can be low. Lead times can stretch to 8 weeks during peak construction season. We have seen procurement teams in Vietnam and Chile lose weeks waiting for a single valve.
Silver Automation Instruments is a flow meter manufacturer and supplier in Nanjing, China. Our main products include electromagnetic flow meters
Example Sizing for a Chiller Plant in Manila
A contractor in Manila needed a balancing valve for a chilled water line. The pipe was DN25 and the target flow was 2200 liters per hour. The Caleffi QuickSetter DN25 range is 700 to 4500 liters per hour. That works. The contractor installed one QuickSetter on the return line and set the float to 2200 liters per hour. Later the building owner wanted flow data on the BMS. The QuickSetter only gives local reading. We supplied a Silver Instruments electromagnetic flow meter DN25 with 4-20 mA HART output and pulse output for the same line. The BMS received real time flow data without changing the balancing valve.
That setup is common. Use the balancing valve for commissioning. Use an inline flow meter for continuous monitoring.
What to Send Us for a Quote
If you need a flow meter or a balancing valve with remote output, send us these details. Include the pipe size in DN or inches, the flow range in liters per hour or gallons per minute, the medium, the temperature in degrees Celsius, and the pressure in bar. Also tell us your country so we can check shipping options.
Contact Silver Automation Instruments today. Tel: +86-135-1213-1526. WhatsApp: 86-135-12131526. WeChat: +86 13512131526. Our website is flow-meter.com.au. We respond to technical questions within one business day.
FAQ
Question: Can I buy Caleffi QuickSetter valves from Silver Instruments?
Answer: No. We do not sell Caleffi branded valves. We supply equivalent industrial flow meters for the same pipe sizes and flow ranges.
Question: What is the flow meter accuracy of a QuickSetter?
Answer: The Caleffi flow meter inside the QuickSetter is about plus or minus 5 percent of full scale. For higher accuracy, use an electromagnetic flow meter with plus or minus 0.5 percent accuracy.
Question: How do I size a QuickSetter balancing valve?
Answer: Match the pipe DN to the valve size and check that your target flow falls inside the flow range for that size. Also check pressure and temperature limits.
Question: What output signals do your flow meters support?
Answer: We provide 4-20 mA, HART, pulse, RS485 Modbus, and optional wireless output. Tell us your control system brand and we will match the signal.
Question: Do you ship to Southeast Asia and Latin America?
Answer: Yes. We ship to Vietnam, Malaysia, Indonesia, Thailand, Chile, Peru, Mexico, Saudi Arabia, and many other countries by DHL, FedEx, or sea freight.
Hot Blog
Related AD
