Company Profile

Flow Meter Suppliers: B2B Sourcing Portal for Volumetric Sensors

Quick Answer

Silver Automation Instruments runs a B2B sourcing portal for volumetric flow sensors like oval gear, Coriolis, and magnetic meters. You can request a tailored quote by sending your fluid type, viscosity in cP, pipe diameter DN, flow range, and required output signal. We ship to Southeast Asia, Oceania, Latin America, the Middle East, and Africa with full documentation.

Direct Access to Positive Displacement and Mass Flow Meters

Most procurement teams waste days comparing multiple flow meter suppliers. Here is the thing: our portal gives you direct access to a tested range of volumetric sensors. No need to search across three websites. You select the technology that matches your process. Then we configure the meter.

We have supplied oval gear flow meters to a palm oil processor in Indonesia. They needed a meter for crude palm oil at 60 °C with a viscosity of 55 cP. They sent us the pipe size DN50 and asked for a 4-20 mA HART output. We shipped five units to Surabaya in three weeks.

For chemical batching, a paint manufacturer in Vietnam uses our Coriolis mass flow meter. Their fluid is a solvent-based coating with 150 cP. They also required ATEX Zone 1 certification because the area has flammable vapors. We configured a meter with stainless steel wetted parts and an Ex d housing.

Technology Range You Can Source

The portal covers oval gear, Coriolis, magnetic, ultrasonic, vortex, and thermal mass flow meters. Each technology has a clear application band. Oval gear meters work best for viscous oils from 1 to 2000 cP. Magnetic flow meters handle conductive water-based fluids with conductivity above 5 µS/cm. Coriolis meters give you direct mass flow in kg/h regardless of fluid density changes.

In practice, many engineers skip the transducer signal part and then scramble later. We always ask upfront: do you need a pulse output for a totalizer, a 4-20 mA analog signal, or a Modbus RTU link. This simple check saves weeks of rework.

Supplementary Instruments and Records

Beyond flow meters, you can source pressure transmitters and paperless recorders through the same portal. A compact pressure transmitter with a 4-20 mA output often pairs with a flow meter to correct volume for gas applications. We have seen this setup on many biogas sites in Thailand and the Philippines.

Quote and Lead Time Expectations

When you ask for a quote, send us these details: fluid name, operating pressure (bar), temperature (°C), pipe size (DN), flow range, and required output. We usually return a proposal in half a day. For standard oval gear flow meters up to DN50, lead time to Jakarta or Dubai is about 15 days. Larger DN80-DN100 Coriolis meters may need 25 days because of calibration and certification.

Do you need an ATEX, IECEx, or SIL rating. State this in your first email. We keep certified inventory in our Nanjing center to reduce lead times for hazardous area projects.

How to Start a Sourcing Request

Send us your pressure (bar), temperature (°C), pipe size (DN), and flow range. Email [email protected] or call +86-25-68650347. You can also reach us on WhatsApp at +86-25-52155837 or WeChat at +86 15365082610. No generic forms. You get a reply from an application engineer who reads your process data.

Frequently Asked Questions

What volumetric flow meters can I source from this portal? You can source oval gear, Coriolis, magnetic, ultrasonic, vortex, and thermal mass flow meters. We also offer positive displacement meters for fuels, diesel, and heavy oils.

Can Silver Instruments supply flow meters for high-viscosity fluids like heavy oil? Yes. Oval gear flow meters handle fluids up to 2000 cP with good accuracy. We have supplied unit